Menu items in the range 400 to 499, relating to preroll (Continued)
Item number | Item name | Settings |
403 | AUTOMATIC PREROLL | Select whether the IN point is automatically set by pressing the PREROLL button, |
| REFERENCE ENTRY | when the IN point is not set on starting preroll. |
|
| DIS: Do not set IN point automatically. |
|
| ENA: Set IN point automatically. |
|
|
|
405 | CUEUP BY CTL | Select the tape transport mode when cuing. This setting is valid only when CTL/TC |
|
| is set to “CTL”. |
|
| CAP.: During cueup, the tape runs with “pinch ON” (maximum tape speed 10 times |
|
| normal). |
|
| REEL: During cueup, the tape runs with “pinch OFF”. As the tape approaches the |
|
| cue up point and the tape speed drops, the tape transport switches to the |
|
| “pinch ON” state.a) |
|
| To give priority to editing accuracy, select “CAP.”. |
|
|
|
a)When controlled from an editor
Menu items in the range 500 to 599, relating to tape protection
Item number | Item name |
| Settings | |
501 | STILL TIMER |
| Select the time delay from when the tape stops (either the “stop mode” or the still | |
|
|
| playback mode in search mode) until the unit automatically switches to the tape | |
|
|
| protection mode, in order to protect the video heads and tape. | |
|
|
| 0.5S to 8M to 30M: Set the value in the range 0.5 seconds to 30 minutes. | |
|
|
|
| |
502 | TAPE PROTECTION |
| Select the protection mode to protect the video heads and tape when in the still | |
| MODE FROM SEARCH |
| playback mode in search mode (jog/shuttle). | |
|
|
| STEP: Step forward at 1/30 times normal speed every 2 seconds. | |
|
|
| STDBY: Switch to Standby OFF mode (the unit not on standby). | |
|
|
| T.REL: Switch to tension release mode (the tape tension slackened). | |
|
|
|
| |
503 | TAPE PROTECTION |
| Select the operation of the protection mode to protect the video heads and tape | |
| MODE FROM STOP |
| when stopped (the “stop mode”). | |
|
|
| STDBY: Switch to Standby OFF mode (the unit not on standby). | |
|
|
| T.REL: Switch to tension release mode (the tape tension slackened). | |
|
|
| STEP: Step forward at 1/30 times normal speed every 2 seconds. | |
|
|
|
| |
504 | DRUM ROTATION IN |
| Select whether the drum rotates in Standby OFF mode. | |
| STANDBY OFF |
| OFF: Drum does not rotate. | |
|
|
| ON: Drum rotates. | |
|
|
|
| |
505 | STILL TENSION |
| Select the tape tension state in the still playback mode. | |
|
|
| NORML: Normal tape tension is maintained during still playback mode, ready for | |
|
|
| playback. | |
|
|
| LOOSE: Reduce the tape tension further from the NORML setting. (Select | |
|
|
| “LOOSE” when the unit is on standby for a long period of still playback, for | |
|
|
| example, in a library management system (LMS).) | |
|
|
|
| |
|
|
| Note |
|
|
|
| When “LOOSE” is selected and the tape tension is reduced, playback cannot be | |
|
|
| guaranteed. | |
|
|
|
|
|
Menus Setup 9 Chapter