Item | Setting |
F9 (SETUP | Set the HD/SD output setup level (59.94i |
LV) (59.94i | mode) or black level (50i mode) |
mode)/(BLK | PRESET: Regardless of manually set |
LEVL) (50i | values, the level is set to the standard |
mode) | value. |
| Manual setting: With the displayed setting |
| flashing, turn the MULTI CONTROL |
| knob to adjust the setup level across the |
| range ±30 IRE (59.94i mode) or to |
| adjust the black level across the range |
| ±210 mV (50i mode). |
|
|
F10 | Function for setting the level control to |
(PRESET) | “PRESET (UNITY)” |
|
|
This is a function menu page for setting other items.
Item | Setting |
F1 | Select the number of fields for capstan lock in |
(CAPSTAN) | playback and editing. |
In 59.94i, 29.97PsF system
2F: The capstan servo locks in units of 2 fields.
•For tape output, color framing may not match the reference signal selected with F2 (REF VID) in P03:VID PROC.
•In assemble editing, color framing may not be continuous at edit points.
4F: The capstan servo locks in units of 4 fields.
•For tape output, color framing matches the reference signal selected with F2 (REF VID) in P03:VID PROC.
•In assemble editing, color framing is continuous at edit points.
In 50i, 25PsF system
2F: The capstan servo locks in units of 2 fields.
•For tape output, color framing may not match the reference signal selected with F2 (REF VID) in P03:VID PROC.
•In assemble editing, color framing may not be continuous at edit points.
4F: The capstan servo locks in units of 4 fields.
•For tape output, color framing may not match the reference signal selected with F2 (REF VID) in P03:VID PROC.
•In assemble editing, color framing may not be continuous at edit points.
8F: The capstan servo locks in units of 8 fields.
•For tape output, color framing matches the reference signal selected with F2 (REF VID) in P03:VID PROC.
•In assemble editing, color framing is continuous at edit points.
The setting is fixedly “2F” when the system frequency is 23.98PsF or 24PsF.
Item | Setting | |
F2 |
| (No function assigned) |
|
|
|
F3 |
| Specify whether to preread (read before |
(PREREAD) | write) in insert editing. | |
|
| ON: Preread depending on the setting in setup |
|
| menu item 319. |
|
| OFF: Do not preread. |
|
|
|
F4 |
| (No function assigned) |
|
|
|
F5 | (CHARA) | Specify whether to superimpose the text |
|
| information including timecode, menu |
|
| settings, and error messages over the video |
|
| signals output from the HDSDI OUTPUT3 |
|
| (SUPER) connector, SDI OUTPUT3 (SUPER) |
|
| connector and COMPOSITE VIDEO |
|
| OUTPUT3 (SUPER) connector. |
|
| ON: Superimpose. |
|
| OFF: Do not superimpose. |
|
|
|
F6 | Select the content of tape information to | |
|
| display in the ancillary message display. |
|
| TOTAL: Display total recorded time. |
|
| REMAIN: Display remaining time. |
|
|
|
F7 |
| (No function assigned) |
|
|
|
F8 |
| (No function assigned) |
|
|
|
F9 |
| (No function assigned) |
|
| |
F10 | (No function assigned) | |
|
|
|
This is a function menu page for setting other items.
Item | Setting |
F1 | (No function assigned) |
|
|
F2 (UMID) | Displays UMID information during recording |
| or playback. |
| For details of UMID, see Chapter 7. |
|
|
F3 | Jump to P104: SHOT MRK (shot mark |
(SHOT MRK) | page). |
|
|
F4 | (No function assigned) |
|
|
F5 | (No function assigned) |
|
|
F6 | (No function assigned) |
|
|
F7 | (No function assigned) |
|
|
F8 | Freeze an image while selected when setup |
(FREEZE) | menu item 904 for setting the freeze |
| operation is set to “MOMNT”. When setup |
| menu item 904 is set to “LATCH”, the freeze |
| continues even after this button is released. |
| When this button is pressed again in the |
| freeze on state, the freeze image is updated |
| and the freeze restarts. |
|
|
F9 | Release an image from the freeze off state |
(FREZ OFF) | when setup menu item 904 is set to |
| “LATCH”. |
|
|
F10 | (No function assigned) |
|
|
Menu Function 8 Chapter