To start playback at the on-air cue from the on-air start point

Use the following procedure.

1 Holding down the SHIFT/ENTRY button, select F3 (REVIEW) in function menu page P06: EDIT.

F3 (REVIEW) lights, and the tape is cued up to the on- air start point. After the tape is cued up, F3 (REVIEW) flashes.

2 At the moment of the on-air cue, hold down the SHIFT/ENTRY button and select F3 (REVIEW) again.

F3 (REVIEW) lights, and playback starts at normal speed.

Between the speed variation start and end points, DMC playback is carried out at the stored speed, and then playback continues at normal speed and the tape stops at the on-air end point.

To start playback immediately after preroll Holding down the SHIFT/ENTRY button, select F2 (PREVIEW) in function menu page P06: EDIT.

F2 (PREVIEW) is lit, and after preroll, DMC playback is carried out at the stored speed from the speed variation start point, then playback continues at normal speed from the speed variation end point.

To stop the tape during DMC playback Press the STOP button.

To exit DMC playback mode

Press the F4 (DMC) button and the ALT/DELETE button simultaneously.

Playback and Recording 4 Chapter

4-2 Playback 41