Sony HDW-1800, HDW-D1800 2-2Connector Panel, 1Analog audio input/output section

2-2 Connector Panel

Parts of Function and Location 2 Chapter

1Analog audio input/output section (see page 22)

2Analog video input/output section (see page 23)

Air inlet	HDV IN connector (OPTION)	3Digital audio input/output section (see page 23)
	(see page 25)

4Digital signal input/output

section (see page 23)

Air outlet

5Power supply section (see page 24)

7Timecode input/output	6External device connectors (see page 24)
section (see page 25)
8Audio monitor signal output
section (see page 25)

1Analog audio input/output section

1 AUDIO INPUT CH1 and CH2 connectors

2AUDIO INPUT CH1 and CH2 LEVEL switches

AUDIO INPUT

CH1LEVEL CH2LEVEL

LOW HIGH LOW HIGH

OFF	ON	OFF	ON
	600Ω		600Ω

AUDIO OUTPUT

CH1 CH2

3AUDIO OUTPUT CH1 and CH2 connectors

aAUDIO INPUT CH1 and CH2 (channels 1 and 2) connectors (XLR 3-pin, female)

Input analog audio signals to channels 1 and 2. You can record analog audio signals input to these connectors to any audio track on tape.

bAUDIO INPUT CH1 and CH2 (channels 1 and 2) LEVEL switches

Set these for each channel as shown in the following table, according to the audio input levels and the impedance to the AUDIO INPUT CH1 and CH2 connectors.

AUDIO INPUT CH1 and CH2 LEVEL switch settings

Audio input level and impedance		Switch setting
Level	Impedance
–60 dBu	High impedance	LOW-OFF
(microphone	(approx. 20 kΩ)	(left position)
input)
+4 dBu	High impedance	HIGH-OFF
(line audio input)	(approx. 20 kΩ)	(center position)
+4 dBm	600 Ω	HIGH-ON 600 Ω
(line audio input)		(right position)

cAUDIO OUTPUT CH1 and CH2 (channels 1 and 2) connectors (XLR 3-pin, male)

Output analog audio signals for channels 1 and 2.

22 2-2 Connector Panel