Sony HDW-1800, HDW-D1800 manual 91

Menu items in the range 600 to 650, relating to the timecode generator (Continued)

Item number	Item name			Settings
631	REC START MARK
	MODE
	Sub-item
	1	CRASH REC		OFF: Do not write recording start marks.
				ON: Write recording start marks during normal recording.
	2	ASSEMBLE		OFF: Do not write recording start marks.
				ON: Write recording start marks during assemble editing.
	3	INSERT		OFF: Do not write recording start marks.
				ON: Write recording start marks during insert editing.
635	LISTING TYPE
	SELECT
	Sub-item
	1	REC START		OFF: Do not read recording start marks.
		MARK		ON: Read recording start marks.
	2	SHOT MARK 1		OFF: Do not read shot mark 1.
				ON: Read shot mark 1.
	3	SHOT MARK 2		OFF: Do not read shot mark 2.
				ON: Read shot mark 2.
	4	POST MARK		OFF: Do not read post marks.
				ON: Read post marks.
636	MARK SELECT IN			SHOT1: Write shot mark 1 during recording and assemble editing.
	REC/ASSEMBLE			SHOT2: Write shot mark 2 during recording and assemble editing.
				POST: Write post marks during recording and assemble editing.
		Menu items in the range 651 to 699, relating to the UMID
Item number	Item name			Settings
651	UMID OUTPUT			Select the UMID type to be output.
				off: Do not output UMID.
				BASIC: Output Basic UMID.
				EXTND: Output Extended UMID.
				Note
				Even if “EXTND” is selected, Basic UMID is output if Basic UMID is recorded on the
				tape being played back.
653	UMID HD VANC			Specify the HDSDI signal VANC line into which the generated UMID should be inserted.
	LINE		9, 572		14,577	19,582
			10,573		15,578	20,583
			11,574		16,579
			12,575		17,580
			13,576		18,581
				Note
				The output VANC line during playback follows the setting for recording.

Menus Setup 9 Chapter

9-4 Items in the Extended Setup Menu 91