Menus Setup 9 Chapter
Menu items in the range 700 to 799, relating to video control (continued)
(Menu items in the range 715 to 720, settings for controlling the SD video processing according to the menu settings)
Item number | Item name |
| Settings | |
718 | SETUP LEVEL |
| (Has no effect in 24PsF or 23.98PsF mode) | |
|
|
| Adjust the SD setup level (black level). | |
|
|
| 0 to 110H to 220H | |
|
|
|
| |
|
|
| Note |
|
|
|
| This item is valid for both HD and SD outputs when | |
|
|
| item 212 “VIDEO REMOTE CONTROL SELECT” is set to “Black”. | |
|
|
|
| |
719 | SYSTEM PHASE SYNC |
| Adjust the SD output signal sync phase. | |
|
|
| 0 to 80H to FFH | |
|
|
|
| |
720 | SYSTEM PHASE SC |
| Adjust the SD output signal subcarrier phase. | |
|
|
| 0 to 3FFH | |
|
|
|
|
|
Notes
•For menu items 715 to 718 or 740 to 747, set F5 (V.PROC) in function menu item P03: VID PROC to “MENU”. When it is set to “MENU”, all controls for video output processing on the control panel are disabled.
•When menu item 337 is set to “SD”, changing the settings of menu items 719 and 720 changes the phase of HD output signals as well as that of SD.
After changing these settings, use F3 (SYNC PHS) and F4 (SYNC FIN) in function menu page P03: VID PROC, or menu items 745 and 746 to readjust the phase of HD output signals.
Menu items in the range 700 to 799, relating to video control (continued)
Item number | Item name | Settings |
726 | H BLANKING WIDTH | Select the horizontal blanking width of the video output signal. |
|
| NAROW: Digital blanking (narrow) |
|
| WIDE: Analog blanking (wide) |
|
| When “WIDE” is selected, the horizontal blanking width complies with RS170A, |
|
| and normally the blanking is widened and the image becomes narrower. It is |
|
| recommended to select “NAROW” at editing, then select “WIDE” for broadcast |
|
| transmission to output a signal conforming to the standard. |
|
|
|
727 | VIDEO EDIT PREVIEW | Set the output phase for the video playback signal when any of F2 (INS TC), F3 |
| SWITCHER | (INS CUE), and F5 (ASSEMBLE) to F10 (INS A4) in function menu page P07: |
|
| E.PRESET is lit. |
|
| INT: The video playback signal output phase is the same as the output phase in E- |
|
| E mode. Use this setting when editing with a single VTR, or when previewing |
|
| while monitoring the VTR output signal. |
|
| EXT: The video playback signal output phase is the same as the phase of an input |
|
| video signal or external reference signal. |
|
|
|
728 | OUTPUT SCH PHASE | Control the subcarrier H phase. |
|
| 0 to 800H to FFFH |
|
|
|
732 | COMPOSITE MODE | Select the chroma filter through which the composite video signals are output. |
|
| WIDE: Output via SMPTE WIDE. |
|
| STD: Output via SMPTE STANDARD (NARROW). |
|
|
|
740 | MASTER LEVEL (HD) | Adjust the Y, PB, and PR levels of the |
|
| HDSDI OUTPUT connector simultaneously. |
|
| 0.0%(0H) to 100% (800H) to 141.3% (B4EH) |
|
|
|
741 | Y LEVEL (HD) | Adjust the Y level of the |
|
| OUTPUT connector. |
|
| 0.0% (0H) to 100% (800H) to 141.3% (B4EH) |
|
|
|
742 | PB LEVEL (HD) | Adjust the PB level of the |
|
| OUTPUT connector. |
|
| 0.0% (0H) to 100% (800H) to 141.3% (B4EH) |
|
|
|
94