Overview 1 Chapter

Locations and Functions of Parts

6CONTROL-S (S control input) connector (stereo mini jack)

By connecting a controller, such as the SVRM-100A, equipped with an S control output to this connector, tape transport on this recorder can be remotely controlled.

1Tape transport control block

1LOCK key and indicator

2REW 0 key and indicator

3PLAY ( key and indicator

4 F FWD ) key and indicator

LOCK

REW

PLAY

F FWD

 

º

·

‚

REC

FRAME

STOP

FRAME

®

æ

￿

8 FRAME 7 key

7STOP p key

6FRAME ' key

5REC r key

1LOCK key and indicator

Press this key to turn on/off the key-lock function (provided to prevent misoperation).

The LED indicator (red) lights when the function is on. When this indicator is lit, other keys are disabled. To release the lock, press the LOCK key again.

A four-digit password to release the lock can be specified by using the Function Control menu.

For details, see “Setting Passwords” on page 5-16.

2REW 0(rewind) key and indicator

Press this key to rewind the tape. The LED indicator (green) lights.

This key functions as the reverse search key during playback.

3PLAY (key and indicator

Press this key to start playback. The LED indicator (green) lights.

On the HSR-2/2P, this key also functions as the PRE REVERSE PLAY key. When this key is pressed during recording, playback is performed without stopping recording.

For details, see “Playback During Recording” on page 2-12.

4F FWD )(fast forward) key and indicator Press this key to fast-forward the tape. The LED indicator (green) lights.

This key functions as the forward search key during playback.

5REC r(record) key

Press this key to start recording.

6FRAME 'key

Press this key to reverse the picture by one frame.

7STOP pkey

When you press this key during playback, playback ends. When you press this key during recording, a message to confirm that you want recording to stop is displayed.

With the HSR-2/2P, guidance for the next operation is displayed when you press this key in Playback During Recording mode.

8FRAME 7key

Press this key to advance the picture by one frame.

2Menu operation block

1MENU key

2CURSOR B/bkeys

3CURSOR V/vkeys

MENU

￿￿

ı￿CURSOR ￿

SET/YES ￿￿ RESET/NO

5RESET/NO key

4SET/YES key

1MENU key

Press this key to enter Menu mode. Press again to exit the mode.

2CURSOR B/bkeys

Used to move from one layer to another in Menu mode.

While monitoring a picture, you can switch pages (different camera configuration with the same screen divisions) with these keys.

1-6Chapter 1 Overview