5 When the settings are completed, press the SET key.

A message “NOW SAVING” is displayed, and the settings are stored in nonvolatile memory.

The Indication Control menu is restored.

To restore to the previous setting

Before pressing the SET key, press the MENU key. The message “ABORT !” is displayed, and the previous setting is restored.

Setting the Display Structures

Assign the cameras to the divisions of each divided screen for monitoring and playback. These display structures can be independently set for monitoring and playback.

In display structures for playback, you can assign not only playback cameras but also monitoring cameras. In the division to which a monitoring camera has been assigned, you can see the current picture from the camera even while playback is in progress in other divisions.

To set the monitor display structures

Use MONI DISP STRUCTURE (Moni Disp) of the Image Control menu for making the setting.

Note

When the settings on CAMERA CONNECTION (page 5-7) are changed, the settings of the display structures may be automatically changed according to the CAMERA CONNECTION settings.

1 Highlight IMAGE CONTROL MENU (Image Menu) of the top menu by pressing the Vor vkey, then press the bkey.

The Image Control Menu (page 4-6) is displayed.

2 Highlight MONI DISP STRUCTURE (Moni Disp) by pressing the Vor vkey, then press the bkey.

The menu shifts to monitor display structure setting.

SETUP MENU IMAGE CONTROL MENU

MONI DISP STRUCTURE 4 DIVISION

6 DIVISION

7 DIVISION

8 DIVISION

9 DIVISION

10 DIVISION

13 DIVISION 16 DIVISION

3 Highlight the desired division mode by pressing the Vor vkey, then press the bkey.

The setting display of the selected division mode appears on the monitor screen.

Example: 8-Division mode

 

1 page

 

 

 

 

 

CAM 2

 

 

 

(MON)

 

 

 

 

 

 

 

CAM 3

 

 

 

(MON)

 

CAM 1

 

 

 

 

CAM 4

 

(MON)

 

(MON)

 

 

 

 

CAM 5

CAM 6

CAM 7

NO

(MON)

(MON)

(MON)

 

 

 

 

 

4 Select the division to be set by pressing the bor B key.

Each time you press either of the keys, the next division is selected, and the indication for the selected division flash.

5 Select the camera to be monitored in the selected division by pressing the Vor vkey.

Each time you press either keys, the camera numbers of the connected cameras and NO are cyclically selected.

You can specify the camera number by pressing the corresponding number key. Note, however, that the keys of non-connected camera numbers are disabled.

(Continued)

Preparations and Connections 5 Chapter

Chapter 5 Connections and Preparations

5-9