Operations Basic 2 Chapter

Playback During Recording (HSR-2/2P only)

After checking the recorded picture with a Playback During Recording operation, be sure to cancel Playback During Recording mode. If you leave Playback During Recording mode activate for a long time after this operation, the recording capacity of the hard disk drive may be exhausted, and the recorded data on the hard disk may be erased before it is copied to a tape.

To start playback from a desired tape position

Press the F FWD or REW key and find the position where you want to start playback.

Playback starts once you press the PLAY key. (In this case, playback starts from the position where you press the PLAY key, regardless of your preset pre-reverse time.)

To search for a picture

Press the ALARM SEARCH or TIME SEARCH key. Recording continues, and you can execute Alarm Search or Time Search.

For details on the search operations, see “Alarm Search” (page 3-9) or “Time

Search” (page 2-10).

You can also perform a search operation using the F FWD and REW keys or frame-to-frame using the FRAME keys in the same way as in the ordinary playback mode. A search operation can also be performed using the Jog/Shuttle dial of the SVRM-100A.

To play back another cassette

1 With recording continued, press the EJECT key.

Playback During Recording mode is activated, and the cassette is ejected. Recording continues using the hard disk.

2 Insert a cassette to be played and press the PLAY key.

Playback of the inserted cassette begins.

To cancel the Playback During Recording mode

After checking the recorded pictures with a Playback During Recording operation, cancel Playback During Recording mode and copy the data on the hard disk to the tape.

1 Press the STOP key.

Guidance for the next operation is displayed.

2-14Chapter 2 Basic Operations