To assign a monitor camera

Set CAM n (MON).

You can specify the camera number by pressing the corresponding number key. Note, however, that the camera set to NO in CAMERA CONNECTION cannot be selected.

Repeat steps 4 and 5 for all the divisions. The same camera can be assigned to multiple divisions.

When setting the structure in a dividing mode that has multiple pages, the setting display for the subsequent page will appear by pressing the b) key in the last (lower right) division. To return to the pervious page, press the Bkey in the first (upper left) division.

To set the selected division to a blank (no display) division

Set to NO.

If all the divisions of a page are set to “NO, ” that page will be skipped when monitoring. Similarly, if all the divisions of a dividing structure are set to “NO,” that dividing structure will be skipped when monitoring.

6 When the settings are completed, press the SET key.

A message “NOW SAVING” is displayed and the settings are stored in nonvolatile memory.

The Image Control Menu is restored.

To restore the previous setting

Before pressing the SET key, press the MENU key. The message “ABORT !” is displayed, and the previous setting is restored.

Setting the Automatic Change

Cycle

The picture to be monitored in Full screen (nondivided) mode can be automatically changed at the specified cycle.

You can determine whether to automatically change the picture and, if to change, the cycle independently for the VIDEO OUT A and B connectors.

The S-VIDEO connector always outputs the same signal as that from the VIDEO OUT A connector.

Use A IMAGE (A Image) and B IMAGE (B Image) of the Image Control menu.

The setting procedure is common to the A and B connectors.

To activate the automatic change function

Set MONITOR (Monitor) of A IMAGE (A Image) or B IMAGE (B Image) to AUTO (Auto).

1 Highlight IMAGE CONTROL MENU (or display Image Menu) of the top menu by pressing the Vor

vkey, then press the bkey.

The Image Control menu (page 4-6) is displayed.

2 Highlight A IMAGE or B IMAGE (or display A

Image or B Image) by pressing the Vor vkey, then

 

 

 

5Chapter

The menu shifts to corresponding setting.

press the bkey.

 

 

 

Connections

Example: A Image

 

 

 

 

 

 

 

 

 

 

 

 

SETUP MENU

 

 

 

IMAGE CONTROL MENU

 

and

 

A IMAGE

 

 

 

 

M MONITOR

: MANUALm

 

 

Preparations

 

 

 

 

 

ALARM CHANGE : OFF

 

 

 

AUTO CYCLE

 

 

 

 

 

 

 

 

 

 

(Continued)

Chapter 5 Connections and Preparations

5-11