Functions Recording/Playback Convenient 3 Chapter
Series Recording
Long recording can be performed by switching multiple
Requirements for series recording
To activate series recording, it is necessary to connect multiple
For connections, see Chapter 5 “Connections and Preparations.”
Assigning the series recording signal
Assign the series recording signal to either input and output pins of the PARALLEL I/O connector on the rear panel of each
By transmitting the series recording signal via the connectors, recording is relayed to the subsequent
The signal assignment is made from the Remote Control menu.
Once you assign the signal, it is not necessary to set it again unless it needs be changed.
For the Remote Control Menu, see Chapter 4 “Menu Operations.”
To activate series recording
1 Turn on the power and insert a cassette in to each
2 Press the REC key on the first
Recording starts on the first
When the remaining time of the tape is near 2 minutes, the first
When the next
To cancel series recording
Press the STOP key on the
Chapter 3 Convenient Recording/Playback Functions |