Chapter 5

Connections and

Preparations

Connections

Video Cameras

Number of cameras

In the standard HSR-1/1P/2/2P configuration, up to 4 camera can be connected.

By mounting the optional HSRA-11 input boards (max. 3 boards), 4 inputs per board can be added; thus, a maximum of 16 cameras can be connected to the recorder.

For mounting the HSRA-11, refer to the instruction manual for the HSRA-11.

Input signals and level from cameras

VBS or VS signal: 1.0 Vp-p, 75 ohms, unbalanced

Remote Controls

The recorder has a PARALLEL I/O and an RS-232C connector on the rear and a CONTROL-S connector on the front for control from external devices.

PARALLEL I/O connector

For 24 input pins and 8 output pins of this 37-pin D- sub connector, you can assign various functions as required, such as input/output for alarm recording and command inputs for tape transport control.

The assignment is made using the Remote Control menu.

For the functions that can be assigned, see “Remote Control Menu” on pate 4-13.

Video Monitors

The number of monitors

Monitors can be connected to two BNC-type connectors and one S connectors.

The monitors connected to the BNC connectors can display different pictures.

Output signals and level to monitors

VBS signal: 1.0 Vp-p, 75 ohms, unbalanced (VIDEO OUT)

Y signal: 1.0 Vp-p, 75 ohms, unbalanced (S-VIDEO)

C signal: 0.28 Vp-p (HSR-1/2) or 0.30 Vp-p (HSR- 1P/2P), 75 ohms, unbalanced (S-VIDEO)

Use the supplied multi connector for connection.

RS-232C connector

Using this 9-pin D-sub connector, you can control the recorder from a computer via an RS-232C interface.

CONTROL-S connector

To this stereo mini jack, you can connect the SVRM- 100A remote control unit.

Chapter 5 Connections and Preparations

5-1