Error Codes and Messages

This unit is provided with a self-diagnosis function that

outputs an error message to the monitor screen and

detects internal errors. When it detects an error, it

indicates an error code in the character display.

 

 

 

Code

Message

Meanings

 

 

 

00-001

ERROR 00-001

An error detected in the tape block in a mode other than

 

AN ERROR DETECTED IN TAPE BLOCK.

recording.

 

 

 

 

ERROR 00-001

An error detected in the tape block during recording.

 

AN ERROR DETECTED IN TAPE BLOCK.

 

00-010

ERROR 00-010

Recording fails for some reason, such as system data reading

 

RECORDING FAILED.

failure.

 

RECORDING IS CONTINUED ON HARD DISK.

 

60-00*

ERROR 60-00*1)

An error detected in the hard disk in a mode other than

 

AN ERROR DETECTED IN HARD DISK.

recording.

 

 

 

 

 

 

ERROR 60-00*1)

An error detected in the hard disk during recording.

 

AN ERROR DETECTED IN HARD DISK.

 

 

RECORDING IS CONTINUED ON TAPE.

 

 

 

 

40-011

ERROR 40-011

Signals from camera 1 to 4 cannot be recorded.

 

CAMERA 1 - 4 RECORDING FAILED.

 

 

 

 

 

40-012

ERROR 40-012

Signals from camera 5 to 8 cannot be recorded.

 

CAMERA 5 - 8 RECORDING FAILED.

 

40-013

ERROR 40-013

Signals from camera 9 to 12 cannot be recorded.

 

CAMERA 9 - 12 RECORDING FAILED.

 

 

 

 

 

40-014

ERROR 40-014

Signals from camera 13 to 16 cannot be recorded.

 

CAMERA 13 - 16 RECORDING FAILED.

 

40-015

ERROR 40-015

Picture to be output cannot be correctly updated.

 

AN ERROR DETECTED IN DA.

 

90

ERROR 90

The recorder is not operating properly.

 

(displayed only on the character display of this

 

 

recorder)

 

 

 

 

92-013

ERROR 92-013

Serial communication error between CPU and the KY board.

 

COMMUNICATION ERROR WITH PANEL

 

 

KEY BLOCK.

 

 

 

 

92-014

ERROR 92-014

Serial communication error between CPU and the tape block.

 

COMMUNICATION ERROR WITH TAPE

 

 

BLOCK. RECORDING IS CONTINUED ON

 

 

HARD DISK.

 

 

 

 

97-002

ERROR 97-002

Sum error detected in the menu data loaded from EEPROM.

 

ILLEGAL MENU SETTING.

 

 

INITIALIZE THE MENU SETTING.

 

 

 

 

1)001: Cannot access the register.

002: Cannot access the data.

Troubleshooting and Maintenance 6 Chapter

Chapter 6 Maintenance and Troubleshooting

6-5