Setting Passwords

You can set passwords to release the key-lock function that is activated by pressing the LOCK key.

As you can classify the recorder’s key functions for three levels each having a different password to release the locks, operations of the functions can be limited by the levels, such as Level 1 for the operator, Level 2 for the administrator, and Level 3 for the system manager. For the level settings, use FUNCTION LEVEL SET of the Function Control Menu (page 4-11).

Then, set the passwords using PASSWORD SET of the same menu.

To set a new password

1 Highlight FUNCTION CONTROL MENU (or display FuncMenu) of the top menu by pressing the Vor vkey, then press the bkey.

The Function Control menu is displayed.

SETUP MENU

FUNCTION CONTROL MENU

AUTO REW

: ON

POWER ON REC

: OFF

BEEP

: ON

STILL

: FRAME

PRIORITY1)

: PLAY

PRE REV TIME1)

: 5 MIN

FUNCTION LEVEL SET

PASSWORD SET

1) HSR-2/2P only

2 Highlight PASSWORD SET (or display Password) by pressing the vkey, then press the bkey.

The menu shifts to password setting.

SETUP MENU

 

FUNCTION CONTROL MENU

 

PASSWORD SET

 

M LEVEL 1

m

LEVEL 2

 

LEVEL 3

 

3 Highlight the level for which a password is to be set, then press the bkey.

The password setting display for the selected level appears.

PASSWORD

INPUT NEW PASSWORD

– – – –

SHIFT : M

INPUT : NUM KEY

TO MENU : MENU KEY

DATA SET : SET KEY

CLEAR : RESET KEY

4 Enter a 4-digit number from the left digit by using the numeric keys.

To enter 0, press 0.

The display for the entered digit changes to * both on the monitor display and character display.

The Bkey acts as a backspace key.

5 Press the SET key.

A request message for repeated input of the same password appears, and the number input area returns to “– – – –.”

6 Enter the same number again and press the SET key.

A message “NOW SAVING” is displayed, and the password is stored in nonvolatile memory.

Repeat steps 2 to 6 for each of the levels as required.

To change or delete the password

1 Call the password setting display by performing step 1 and 3 of “To set a new password.”

A message requesting the password appears, and the input area “– – – –” appears.

2 Enter the password currently set using the numeric keys and press the SET key.

The recorder enters the status in step 3 of “To set a new password.”

(Continued)

Preparations and Connections 5 Chapter

Chapter 5 Connections and Preparations

5-15