Flexibility in Alarm Recording modes

To capture more and even sharper images, the HSR-1/ 1P/2/2P not only changes its recording mode to the higher refresh and higher picture quality mode on alarm, but also performs interleaved recording, which accelerates the recording cycle of the camera in alarm status.

It can also record images from the camera in alarm status only for a preset duration. In addition, since alarm and timer recordings can be combined, the HSR- 1/1P/2/2P can be set to normal recording mode during office hours and set to alarm recording at night.

Continuous recording function

The recorder can continuously record images, even while you are changing or rewinding the tape, so you don’t have to worry about the breakup of a recording.

Sophisticated security function

The key-lock function may prevent accidents, such as inadvertent break-off of important recording.

For higher security, you can specify passwords at three levels.

Watermark

Using an original watermark system, the HSR-1/1P/2/ 2P can identify image data that has been artificially altered. When alteration is detected, a message is displayed on screen.

Intelligent search functions

Time search/alarm search

You can easily locate the picture from a specific date and time.

With a tape on which alarm recordings have been made, you can locate a specific picture after checking the list of those recordings.

Variable-speed search with a Jog/Shuttle dial By connecting the optional SVRM-100A remote control unit, noiseless picture search can be carried out using its Jog/Shuttle dial.

Rec End search

The recording end point on a tape can be easily located.

Quick recording start

The HSR-1/1P/2/2P can start recording the moment power is turned on. This allows immediate recovery of recording after a power failure.

Pre-alarm recording

Thanks to the Pre-alarm recording capability, recording can be started before catching a trigger signal, thus chances are you’ll have the information you need on tape

High-quality frame recording

By selecting Frame Rec mode, you can record a single frame in response to an alarm in Hyper mode, which provides higher resolution than Super mode.

Power-failure backup function

The HSR-1/1P/2/2P is equipped with a protection circuit (memory-backup circuit with a rechargeable battery) to prevent loss of video data caused by power failure.

If the power fails during recording, the protection circuit activates, and stores video data for 24 hours. When power is restored, the unit automatically resumes recording mode and records the stored video data on the tape.

Notes

•At least 24 hours with the power on is required to fully charge the battery.

•Several frames captured immediately before the power failure may be lost.

Overview 1 Chapter

Chapter 1 Overview 1-3