Settings

When the connections and preparations are completed, perform the system settings in Enhanced menu mode. In the following setting procedures, the indications on the character display on the front panel of the HSR-1/ 1P/2/2P are shown in parenthesis after those on the monitor screen.

Example: IMAGE CONTROL MENU (Image Menu)

Selecting the Enhanced Menu

Mode

1 Enter Menu mode by pressing the MENU key. The top menu appears on the monitor display. The Top menu item that had been selected when you left Menu mode the last time is displayed on the character display on the front panel.

2 When MENU GRADE (Menu grade) is set to BASIC (Basic), change it to ENH (Enhanced).

Top menu in Enhanced Menu mode

SETUP MENU

IMAGE CONTROL MENU

INDICATION CONTROL MENU

REC FUNCTION MENU

FUNCTION CONTROL MENU

REMOTE CONTROL MENU

MAINTENANCE MENU

 

TIME ADJUST

 

MENU INITIALIZE

: ENH m

MENU GRADE

LANGUAGE

: ENG

Setting the Cameras to Use

Specify the cameras to be used for monitoring and recording.

Use CAMERA CONNECTION (CamConnect) of the Image Control menu for the setting.

To use connected cameras for monitoring and recording

Set the number of the camera (the same as the VIDEO IN connector number to which the camera is connected) to CONNECT.

Setting procedure

1 Highlight IMAGE CONTROL MENU (or display Image Menu) of the top menu by pressing the Vor

vkey, then press the bkey.

The Image Control menu is displayed.

SETUP MENU

IMAGE CONTROL MENU

AIMAGE

BIMAGE

CAMERA CONNECTION

MONI DISP STRUCTURE

PLAY DISP STRUCTURE

2 Highlight CAMERA CONNECTION (or display CamConnect) by pressing the Vor vkey, then press the bkey.

The menu shifts to camera connection setting.

The CONNECT/NO indication for CAM 1 flashes.

CAM 1

CAM 2

CAM 3

CAM 4

CONNECT

CONNECT

CONNECT

CONNECT

 

 

 

 

CAM 5

CAM 6

CAM 7

CAM 8

CONNECT

CONNECT

CONNECT

CONNECT

 

 

 

 

CAM 9

CAM 10

CAM 11

CAM 12

CONNECT

CONNECT

CONNECT

CONNECT

 

 

 

 

CAM 13

CAM 14

CAM 15

CAM 16

NO

NO

NO

NO

 

 

 

 

3 Select the camera to be set by pressing the bor B key.

Each time you press either of the key, camera 1 to 16 are cyclically selected, and the CONNECT/NO indication for the selected camera flashes.

4 Select CONNECT or NO by pressing the Vor v key.

Repeat steps 3 and 4 for all the connected cameras.

Preparations and Connections 5 Chapter

Chapter 5 Connections and Preparations

5-7