Functions Recording/Playback Convenient 3 Chapter

Alarm Search

2 Press the ALARM SEARCH key.

3 Using the Vor vkey, specify the sequential number (in order from the current tape position) of the desired alarm recording.

The + mark specifies that the order is in the forward direction and the – mark in the reverse direction.

The valid range is from +99 to –99.

4 Press the SET key.

The tape runs in rewind or fast-forward mode to locate the tape position specified in step 3. When the specified position is located, the image at that position is reproduced in Still mode.

To cancel an alarm search

•If you have not yet pressed the SET key, press the ALARM SEARCH key again.

•If the tape is being searched, press the STOP key.

3-10

Chapter 3 Convenient Recording/Playback Functions