8STATUS indication
The current operating mode (REC, PLAY, F FWD, REW, etc.) is displayed.
9ALARM indication (upper)
If there is either an alarm input common to all cameras or an alarm input from a certain camera to the parallel input, the indication “ALARM” is superimposed on the upper portion of the screen, regardless of the screen display currently selected. This indication also appears even during playback if any new alarm input to the recorder is generated.
0ALARM indication (lower)
If there is an external alarm input, the indication “ALARM” is superimposed on the lower portion of the screen. As this information is recorded on the tape, the indication is also obtained in playback.
!¡ NOT ORIGINAL indication
Thanks to the original watermark system, a “NOT ORIGINAL” indication is superimposed, if the image being played may have been artificially altered.
This indication can be seen only in Still mode (either FRAME key pressed) with the
Note
This indication is disabled in alarm recording in FRAME mode, in Playback During Recording (HSR- 2/2P) mode, or when you switch the unit from high- speed playback to variable playback.
Overview 1 Chapter
Chapter 1 Overview