2 Highlight SETTING OF REC MODE by pressing the Vor vkey, then press the bkey.

The menu shifts to selection layer of the recording mode settings.

SETUP MENU

REC FUNCTION MENU

SETTING OF REC MODE

M REC MODE1m

REC MODE2

REC MODE3

REC MODE4

REC MODE5

3 Highlight the recording mode to be set by pressing the Vor vkey, then press the bkey.

The setting display for the selected recording mode appears.

Example: Setting display for Recording mode 1

REC MODE 1

CAMERA NUMBER : 8

TAPE LENGTH

: 270MIN

IMAGE QUALITY

: SUPER

TIME MODE

: 33H

REC CYCLE

: 1.00SEC

 

(1.00)

SHIFT: µ

CHANGE: Mm

DATA SET : SET

MENU : MENU

 

 

To set CAMERA NUMBER

Specify the cameras to be used for recording.

1 Highlight CAMERA NUMBER on the setting display by pressing the Vor vkey, then press the

bkey.

The setting display for CAMERA NUMBER appears, and the indication for CAM 1 flashes.

CAM 1

CAM 2

CAM 3

CAM 4

REC

REC

REC

REC

 

 

 

 

CAM 5

CAM 6

CAM 7

CAM 8

REC

REC

REC

REC

 

 

 

 

CAM 9

CAM 10

CAM 11

CAM 12

REC

REC

REC

REC

 

 

 

 

CAM 13

CAM 14

CAM 15

CAM 16

NO REC

NO REC

NO REC

NO REC

 

 

 

 

2 Select the camera to be set by pressing the b(or B) key.

Each time you press either key, the next (or the previous) camera is selected, and the indication for the selected camera flashes.

3 For a camera to be used for recording, set the indication to REC by pressing the Vor vkey.

The cameras set to NO REC are not used for recording.

Repeat steps 2 and 3 for the cameras to be set.

Notes

•Only the cameras that have been set to CONNECT with CAMERA CONNECTION can be set to REC.

•When the settings on CAMERA CONNECTION (page 5-7) are changed, the settings of CAMERA NUMBER may be automatically changed according to the CAMERA CONNECTION settings.

4 Press the SET key to register your setting and return to the setting display for the recording modes.

To set other requirements

The REC CYCLE value is automatically calculated according to the TAPE LENGTH and IMAGE QUALITY settings. The TIME MODE and REC CYCLE settings depend on each other, and if either of them is changed, the other automatically changes in accordance.

1 Select the item to be set on the recording mode setting display by pressing the Vor vkey.

Preparations and Connections 5 Chapter

Chapter 5 Connections and Preparations

5-13