Settings

5 When the settings are completed, press the SET key.

A message “NOW SAVING” is displayed, and the settings are stored in nonvolatile memory.

The Image Control menu is restored.

To restore to the previous setting

Before pressing the SET key, press the MENU key. The message “ABORT !” is displayed, and the previous setting is restored.

Notes

•If an optional input board is not mounted to a slot of corresponding connector numbers, CONNECT cannot be selected for those numbers.

•When the settings of this display are changed, the settings of the monitor display structure (page 5-9) and those of the recording modes (page 5-12) are automatically changed.

SETUP MENU

INDICATION CONTROL MENU

MBORDER LINE

: BLACK m

DATE FORMAT

: M D Y

MONTH FORMAT

: NUMBER

TIME FORMAT

: 12H

FRNT TIME DISP

: TM MD

MONI CHAR TYPE : WHITE

MONI CHAR POS

: UP

MONI CHAR INFO

 

REC CHAR POSI

: UP LEFT

REC CHAR INFO

 

2 Highlight CAMERA NAME (or display CameraName) by pressing the Vor vkey, then press the bkey.

The menu shifts to camera name setting, and the first character of the name currently set for the camera connected to the VIDEO IN 1 connector flashes.

Preparations and Connections 5 Chapter

Setting Camera Names

You can specify desired names for connected cameras. Use CAMERA NAME (Camera Name) of the Indication Control menu for the setting.

Usable characters

You can set a name of up to 12 characters including alphabetics, numerics, and some symbols. The specified names are superimposed in the picture from the cameras. CAM1 to CAM 16 are set at the factory.

Note

As the camera numbers are necessary for various setting and selecting pictures for monitoring, it is recommended that the number to be included in the name.

Setting procedure

1 Highlight INDICATION CONTROL MENU (or display Indict Menu) of the top menu by pressing the Vor vkey, then press the bkey.

The Indication Control menu is displayed.

1 CAMERA

2 CAMERA

3 CAMERA

4 CAMERA

 

 

 

 

5 CAMERA

6 CAMERA

7 CAMERA

8 CAMERA

 

 

 

 

9 CAMERA

10 CAMERA

11 CAMERA

12 CAMERA

 

 

 

 

13 CAMERA

14 CAMERA

15 CAMERA

16 CAMERA

 

 

 

 

3 Select the character column to be set by pressing the bor Bkey.

Each time you press either key, the next column is selected, and that selected column flashes.

4 Select the desired character by pressing the Vor v key.

To insert a space, press the RESET key.

Repeat steps 3 and 4 for all the columns.

When you press the bkey at the last column, the first column of the next camera now flashes. Set the names in the same manner for all the connected camera.

5-8

Chapter 5 Connections and Preparations