2 Press the REC key.
Playback During Recording mode is canceled, and the unit is set to the ordinary recording mode.
The data recorded on the hard disk during Playback During Recording operation are copied to the tape.
About the continuity of recording on a tape
The present tape position may be different from the tape position when you started a Playback During Recording operation because of changing cassettes or tape running in Playback During Recording mode. In such a case, a message to show that the tape position has been moved is displayed when you press the REC key in step 2 of “To cancel Playback During Recording mode.”
To continue recording from the present tape position
Press the YES key.
Playback During Recording mode is canceled, and recording continues from the present tape position.
To continue recording from the original tape position when you have started a Playback During Recording operation
1 Press the NO key.
The display returns to the guidance in step 1 of “To cancel Playback During Recording mode.”
2 Find the original tape position by using the Rec End Search function. If the cassette has been changed, first insert the original cassette and locate the original position.
3 Press the REC key again.
Playback During Recording mode is canceled, and copying of the data from the hard disk to the tape begins, maintaining continuity on the tape.
To stop recording Press the STOP key.
A message to confirm that you want recording to stop is displayed. Press the YES key.
A cassette cannot be ejected if copying from the hard disk to the tape has not completed. It may take more than 90 seconds until the cassette can be ejected after you press the YES key.
Operations Basic 2 Chapter
Chapter 2 Basic Operations