Setting the Pre-Reverse Time

(HSR-2/2P only)

With the HSR-2/2P, set the pre-reverse time to see the latest recorded scenes while recording using the Playback During Recording function.

When you press the PLAY (PRE REVERSE PLAY) key during recording, the point of the preset time before the current time is located on the hard disk, then playback starts from that point.

The default pre-reverse time is 5 minutes. You may set it in a range from 1 to 99 minutes in units of minute.

Set the pre-reverse time at PRE REV TIME in the Function Control menu.

1 Highlight FUNCTION CONTROL MENU (or display FuncMenu) of the top menu by pressing the Vor vkey, then press the bkey.

The Function Control menu is displayed.

SETUP MENU

FUNCTION CONTROL MENU

AUTO REW

: ON

POWER ON REC

: OFF

BEEP

: ON

STILL

: FRAME

PRIORITY

: PLAY

PRE REV TIME

: 5 MIN

FUNCTION LEVEL SET

PASSWORD SET

3 Set the pre-reverse time by pressing the Vor vkey.

4 Press the SET key to register your setting.

A message “NOW SAVING” is displayed, and the new setting is stored in nonvolatile memory.

To restore the previous setting

Before pressing the SET key, press the MENU key. A message “ABORT!” is displayed, and the previous setting is restored.

5 Chapter

2 Highlight PRE REV TIME by pressing the vkey, then press the bkey.

The setting display for the pre-reverse time appears.

PRE REVERSE TIME SET

PRE REVERSE TIME : 5MIN

ABORT : MENU KEY

DATA SET : SET KEY

Preparations and Connections

Chapter 5 Connections and Preparations

5-17