You can shoot with the desired exposure setting by adjusting both the shutter speed and aperture. The shutter speed and the aperture value can be changed while recording movies.

1.MENU → (Camera Settings) → [Shoot Mode] → [Manual Exposure].

2.Press the bottom side of the control wheel to select the shutter speed or aperture value, then turn the control wheel to select a value.

When [ISO] is set to other than [ISO AUTO], use MM (Metered Manual) to check the exposure value.

Toward +: Images become brighter.

Toward − : Images become darker.

0: Appropriate exposure analyzed by the product

3.Adjust the focus and shoot the subject.

Note

When [ISO] is set to [ISO AUTO], the ISO value automatically changes to achieve the appropriate exposure using the aperture value and shutter speed you have set. If the aperture value and shutter speed you have set are not suitable for appropriate exposure, the ISO value indicator will blink.

The Metered Manual indicator does not appear when [ISO] is set to [ISO AUTO].

When the amount of ambient light exceeds the metering range of the Metered Manual, the Metered Manual indicator flashes.

The (SteadyShot warning) indicator does not appear in manual exposure mode. The brightness of the image on the monitor may differ from the actual image being shot.

How to Use

BULB

Shooting

Selecting a shooting mode

You can shoot a trailing image of the movement of a subject with long exposure. BULB is suitable for shooting trails of light, such as fireworks.

1.MENU → (Camera Settings) → [Shoot Mode] → [Manual Exposure].

2.Press the bottom side of the control wheel to select the shutter speed, then turn the control wheel counterclockwise until [BULB] is indicated.

3.Press the shutter button halfway down to adjust the focus.

Page 39
Image 39
Sony ILCE-5000 manual Bulb