Basic Operations

zYou can copy the disc* and track titles from the MD in deck A to the MD in deck B (Title Copy Function)

If the MD in deck A has a disc title or track titles, they are all recorded on the MD in deck B. However, if the MD in deck B already has a title, the disc title cannot be copied. In addition, the disc and track titles of premastered MDs are not copied.

*The disc title is copied only when All Tracks Dubbing.

Note

You cannot display menu screens during MD Synchro-Recording.

If you press MENU/NO, recording stops.

When “TOC Writing” appears in the display

The deck is currently updating the Table Of Contents (TOC). Do not move the deck or pull out the AC power cord. Changes to an MD made through recording are saved only when you update the TOC by ejecting the MD or changing the deck to standby by pressing the 1/u switch.

4

Press MD SYNC.

The MD SYNC indicator turns on and deck B becomes ready to

record.

For All Tracks Dubbing and Program Dubbing,

“DUBBING : All” and “OK??” appear, then deck A changes to playing pause at the start of the first track to be recorded.

For One Track Dubbing, “DUBBING : 1Tr” and “OK??” appear, then deck A plays the selected track repeatedly. “A-MD” (digital recording) or “ANLG A-MD” (analog recording) is selected automatically according to the generation of the MD in deck A (see page 47).

5

Press AMS, ·or YES for either deck A or deck B.

Recording starts. The sound of deck B is output.

To

Press

 

 

Cancel the procedure

MENU/NO

 

 

Stop recording

p

 

 

Do not disconnect the deck from the power source immediately after recording

If you do, recorded material may not be saved to the MD. To save the material, after recording, press §EJECT to take out the MD or change the deck to standby by pressing 1/u. “TOC Writing” will appear at this time. After “TOC Writing” goes out, you can pull out the AC power cord.

zThe recording mode (stereo recording or monaural recording) and the recording level are the same as the MD in deck A.

12EN