Sony MDS-W1 25EN, Locating a Specific Track

Playing MDs

Locating a Specific Track

You can quickly locate any track while playing a disc by using the AMS (Automatic Music Sensor) control,

=and +buttons, number buttons, or M.SCAN button on the remote.

When using the remote, press DECK A or DECK B to select the deck to be operated.

MENU/NO

		§EJECT	§EJECT
		￿AMS ±	￿AMS ±
0	)	r	0	)	r
·	P	p	·	P	p

· ￿ AMS ± ·

EJECT

6

DECK A			DECK		RELAY		DECK			DECK B
			A				B
DISPLAY			SCROLL		TIME		INPUT		TIMER
		PLAY MODE						DATE
	CONTINUE		SHUFFLE	PROGRAM RECORDED					PRESENT
A		B		C		D		E
F	1	G 2		H	3	I	4	J	5
K	6	L	7	M	8	N	9	O	10	Number
P	11	Q 12		R	13	S	14	T	15
										buttons
U	16	V	17 W 18			X	19	Y	20

Z21 – 22 23 . 24 , 25

>25	/ >25	REPEAT	A˜B	M.SCAN	M.SCAN
		? !	(	)
	OUTPUT
·		·	P	p
=/+	<	>	MD SYNC	MUSIC SYNC
				T.REC
	=	+	r

0)

To locate	Do the following:
The next or succeeding	During playback, turn AMS clockwise
tracks	(or press +repeatedly) until you
	find the track.
The current or	During playback, turn AMS
preceding tracks	counterclockwise (or press =
	repeatedly) until you find the track.
A specific track	Press number buttons to enter the
directly Z	track number.
A specific track by	1	Turn AMS until the track number
using AMS		you want to locate appears while
		the deck is stopped. (The track
	2	number is flashing.)
		Press AMS or ·.
By scanning each track	1	Press M.SCAN before you start
for 6 seconds (music	2	playing.
scan) Z		When you find the track you want,
		press ·to start playing.

zWhen you directly locate a track with a number over

25Z

You must press >25 first, before entering the corresponding digits.

Press >25 once if it is a 2-digit track number, and twice if it is a 3-digit track number.

To enter “0”, press button 10. Examples: • To play track number 30

Press >25 once, then 3 and 10.

•To play track number 100

Press >25 twice, then 1, 10 and 10.

zYou can extend the playing time during music scan

1While the deck is stopped, press MENU/NO twice to display SET UP menu.

2Turn AMS to select “MUSIC SCAN”, then press AMS.

3Turn AMS to select the desired playing time (6, 10 or 20 seconds), then press AMS.

4Press MENU/NO.

zTo pause playing at the beginning of a track

Turn AMS (or press =or +) after pausing playback.

zTo go quickly to the beginning of the last track

Turn AMS counterclockwise (or press =) while the display shows the total track number, total disc playing time or remaining recordable time of the disc (recordable disc only), or disc name (see page 23).

25EN