Sony MDS-W1 38EN, To enter a space, To cancel labeling, To erase a character, If you entered the wrong character

Editing Recorded MDs

5Press AMS or YES.

A flashing cursor appears in the display.

6Press A TIME/CHAR or B TIME/CHAR to select the character type as follows:

To select	Press A TIME/CHAR or B TIME/
	CHAR repeatedly until
Uppercase letters	“A” appears in the display
Lowercase letters	“a” appears in the display
Numbers	“0” appears in the display

7Turn AMS to select the character. The selected character flashes.

Letters, numbers, and symbols appear in sequential order as you turn AMS.

You can use the following symbols in titles:

!” # $ % & ’ ( ) * + , – . / : ; < = > ? @ _ `

You can press A TIME/CHAR or B TIME/CHAR to change the character type at any time during Step 7 (see Step 6).

8Press AMS to enter the selected character.

The selected character lights continuously and the cursor flashes waiting for the input of the next character.

9Repeat Steps 7 and 8 until you have entered the entire title.

If you entered the wrong character

Press 0or )until the character to be corrected starts flashing, and repeat Steps 7 and 8 to enter the correct character.

To erase a character

Press 0or )until the character to be erased starts flashing, then press CLEAR.

To enter a space

Press AMS while the cursor is flashing.

10Press YES.

This completes the labeling procedure and the title appears in the display.

To cancel labeling

Press MENU/NO or p.

Note

You cannot label a track or an MD while you are recording over an existing track.

38EN