Recording on MDs

8Prepare for recording as necessary.

1Turn AMS to select the menu you want to make setting, then press AMS (or YES).

2Turn AMS to make the setting, then press AMS (or YES).

Menu

You can select

DISC : the deck in which you inserted the MD in Step 2 (“A”, “AnB” or “B”).

To perform Relay Recording, select “AnB”.

INPUT : the source you want to record (“ANLG”, “OPT1”, “OPT2” or “COAX”).

REC MODE : the recording mode (“STEREO”

or “MONO”).

LEVEL SYNC : “ON” or “OFF”.

If you select “ON”, the deck marks track numbers automatically while recording (see page 17).

SMART SPACE : “ON” or “OFF”.

If you select “ON”, the Auto Cut and Smart Space Functions activate (see page 16).

OVERLAP REC : “ON” or “OFF”.

For details on Overlap

Recording, see page 20.

9Press TIMER.

The set contents appear in the display for about two or three seconds and then disappear. The deck turns off automatically.

To cancel timer recording

Press TIMER so that the clock indication disappears.

To check the set contents when the deck stands by for timer recording

Press DISPLAY.

Notes

•You cannot operate any of the controls while the deck is standing by for timer recording or during timer recording. To operate the deck, cancel the timer by pressing TIMER.

•During timer recording, new material is recorded from the end of the recorded portion on the MD.

•Material recorded during timer recording is saved to the MD when the deck turns off automatically after the recording finishes. “TOC Writing” appears in the display at this time. Do not move the deck or pull out the AC power cord while “TOC Writing” is displayed to ensure the complete recording.

•Timer recording will stop if the disc becomes full.

•The deck turns on and changes to recording pause status automatically 60 seconds before the recording start time. Do not operate any of the controls during the period after the deck turns on until the actual starting time is reached. Doing so may cause the timer function to fail to operate correctly.

•Be sure to set the clock before setting the timer.

•The ONCE timer and WEEKLY timer retain their respective start and stop times settings. To use the previous timer settings, press TIMER while the deck is stopped.

The timer check screen appears and then the deck turns off. At this time the “ONCE” or “WEEKLY” setting selected in the SET UP menu is valid.

•If you want to change the settings at the timer check screen, press MENU/NO before the deck turns off.

•Be sure to set different start and stop times.

22EN