Sony MDS-W1 37EN, (Name Function), Labeling Recordings, To cancel the Move Function

5Press AMS or YES.

“Complete ” appears for a few seconds and the moved track begins playing back.

To cancel the Move Function

Press MENU/NO or p.

zYou can undo the Move Function

Use the Undo Function immediately after you moved the track (see page 41).

Editing Recorded MDs

Labeling Recordings(Name Function)

You can create titles for your recorded MDs and tracks. Titles — which may consist of uppercase and lowercase letters, numbers and symbols for a maximum of about 1,700 characters per disc — appear in the display during MD operation. You can also use the remote to label a track or an MD (see “Labeling tracks and MDs with the remote” on page 39).

MENU/NO		MENU/NO
0/)	YES CLEAR	YES	0/)
	§EJECT	§EJECT
	￿AMS ±	￿AMS ±
0	) r	0	) r
· P p		· P p
￿ AMS ±		￿AMS ±
	A TIME/CHAR B TIME/CHAR

Use the following procedure to label a track or an MD.

You can label a track while it is playing, pausing or recording. If the track is recording, be sure to finish labeling before the track ends. If the track ends before you’ve completed the labeling procedure, the characters already entered are not recorded and the track will remain unlabeled.

1Press MENU/NO to display EDIT menu.

2Turn AMS until “Name” appears in the display and press AMS or YES.

Skip this step while recording.

3Turn AMS until “Name In” appears in the display, then press AMS or YES.

4Turn AMS to select “Disc” to label an MD, or to specify the track to label.

While recording, go to Step 6.

(Continued)

37EN