Sony MDS-W1 Playing an MD, 13EN, Press ·, Press 1/u, for MD deck, The STANDBY indicator turns off, Insert an MD into deck A or deck B, You can use both decks for playback

Basic Operations

Playing an MD

23

STANDBY		§EJECT	RELAY MD SYNC		§EJECT
A OUTPUT B
PHONE LEVEL		REC MENU/NO ￿ AMS ± YES			MENU/NO ￿ AMS ± YES		REC
0	)	r	DISPLAY	TIMER	0	)	r
			A-INPUT	B-INPUT
PHONES
·	P	p	A TIME/CHAR	B TIME/CHAR	·	P	p
		CLEAR			CLEAR
		PUSH ENTER			PUSH ENTER

Selects the deck (A or B) for which sound is to be output.

You can use both decks for playback.

When using the controls on the deck

Use the buttons of the deck containing the MD you want to play.

When using the remote Z

Press DECK A or DECK B to select the deck.

Audio output

Output switches automatically to the audio of the deck which newly starts playing.

You can also switch the output as desired by pressing OUTPUT.

zYou can start playing with the track selected in Step 4

1Turn AMS (or press =or +) to select the track you want to play using the display*.

2Press AMS or ·.

*See “Using the Display” on page 23.

zTo use headphones

Connect them to PHONES jack. Use PHONE LEVEL to adjust the volume.

	4
1	Turn on the amplifier and set the source selector to the position
	for MD deck.
2	Press 1/u.
	The STANDBY indicator turns off.
3	Insert an MD into deck A or deck B.
	With the
	label side up

	With the arrow pointing this way
4	Press ·.
	The deck starts playing. Adjust the volume on the amplifier.
To		Do the following:
Stop playing		Press p.
Pause playing		Press P. Press the button again or press ·to
		resume playing.
Go to the next track		Turn AMS clockwise (or press +on the
		remote).
Go to the current track		Turn AMS counterclockwise (or press =on the
or the preceding track		remote).
Take out the MD		Press §EJECT after stopping playing.

Operations Basic

13EN