Sony MDS-W1 AMS, The deck becomes ready to record, 14 Press ·or P. Recording starts, 15 Start playing the program source, Press MENU/NO twice to display SET UP menu

zYou can select SET UP menu with the remote

Press MENU SELECT repeatedly until the desired menu appears, then press YES to enter it.

Monitor audio during recording

The monitor signal does not become monaural, even if you set the recording level to “MONO”.

Note

When you want to make a digital recording between deck A and deck B, “Cannot Copy” may flash in the display if the MD to be recorded is the second-generation MD recorded via digital-to-digital connection (see page 47). In this case, select ANLG A-MD or ANLG B-MD with the B-INPUT or A-INPUT button.

zTo accurately adjust the recording level

Play the portion of the source you want to record with the strongest signal level during recording pause.

Turn AMS at this time to adjust the recording level so that the red portion of the level meter does not light (so that “OVER” does not appear). (Occasional lighting of “OVER” is acceptable.)

OVER indication

The volume can only be increased up to +12.0 dB. Therefore, if the output level of the connected component is too low, it may not be possible to set the recording level to maximum.

Basic Operations

5		Press MENU/NO twice to display SET UP menu.
6		Turn AMS to select “REC MODE”, then press AMS.
7		Turn AMS to select the mode you want to record in, then press
		AMS.
		To record in	Select
		Stereo sound	STEREO
		Monaural sound*	MONO
		* In the monaural recording, you can record about two times longer than in
		the stereo recording.
	8	Press MENU/NO once to quit the SET UP menu.
9		Press rREC for the deck containing a recordable MD.
		The deck becomes ready to record.

When “ Impossible” appears, see the table on the preceding page to check the combination of A-INPUT and B-INPUT.

10 Press MENU/NO twice to display SET UP menu.11 Turn AMS to select “REC LVL”, then press AMS.

12 Turn AMS to adjust the recording level, then press AMS. With the remote, press REC LEVEL +/– repeatedly.

13 Press MENU/NO once to quit the SET UP menu.14 Press ·or P. Recording starts.15 Start playing the program source.

(Continued)

Operations Basic

9EN