Sony MDS-W1 24EN, Displaying the recording date Z, Checking the playing time, remaining time, and track number

Playing MDs

When you insert an MD, the disc name, total number of tracks and total disc playing time appear in the display as follows:

(The display below shows detail screen for deck A.)

Total number of tracks

Disc name Total disc playing time

Track number	Playing time of
and track title	each track

Checking the playing time, remaining time, and track number

Each time you press A TIME/CHAR or

B TIME/CHAR (or TIME after selecting the deck by pressing DECK A or DECK B) while playing an MD, you can change the display as follows:

(The display below shows detail screen for deck A.)

Track number and playing time of the current track

Press

Track number and remaining time of the current track

Press

Next track to be played

The bar in the display “ ” indicates how much of the current track has been played back.

zThe deck displays the disc and/or track title* any time

If no title is recorded, “No Name” appears instead of a title.

To label a recordable disc and its tracks, see “Labeling Recordings” on page 37.

*Only when the dislpay shows detail screen for deck A or B.

zYou can scroll a title of 8 or more characters (in A/B divided screen) or 17 or more characters (in detail screen for deck A and B) Z

Press SCROLL.

Since the display shows up to 7 characters (in A/B divided screen) or 16 characters (in detail screen for deck A and B) at a time, press SCROLL to see the rest of the title if the title has 8 (or 17) characters or more. Press SCROLL again to pause scrolling, and again to continue scrolling.

Displaying the recording date Z

When the internal clock has been set, the deck automatically records the recording date and time of all recordings. You can then check the recording date and time of a track.

1Locate the track for which you want to check the recording date and time.

When the deck is	Press
stopped	=or +

playing or on play pause =, +, or number buttons

2Press DATE RECORDED.

“ No Date!!” appears if the internal clock has not been set or the track was recorded on another MD deck without a date and time stamp function.

24EN