Sony MDS-W1 29EN, Creating Your Own Program (Program Play), When using the remote, To cancel Program Play, b)When using the remote, b)When using the remote

Playing MDs

Creating Your Own Program (Program Play)

You can specify the playback order of the tracks on an MD and create your own programs containing up to 25 tracks.

When using the remote, press DECK A or DECK B to select the deck to be operated.

Note

You cannot create a program containing tracks from both deck A and deck B.

0/) ￿AMS ± YES ￿AMS ± YES 0/)

		§EJECT	§EJECT
		￿AMS ±	￿AMS ±
0	)	r	0	)	r
·	P	p	·	P	p

· MENU/NO CLEAR									MENU/NO CLEAR ·
		EJECT
DECK A		6		DECK		RELAY		DECK			DECK B
				A				B
	DISPLAY			SCROLL		TIME		INPUT		TIMER
CONTINUE			PLAY MODE						DATE		PROGRAM
		CONTINUE		SHUFFLE PROGRAM RECORDED						PRESENT
	A		B		C		D		E
	F	1	G	2	H	3	I	4	J	5
	K	6	L	7	M	8	N	9	O	10	Number
	P	11	Q	12	R	13	S	14	T	15
	U	16	V	17 W 18			X	19	Y	20	buttons

Z21 – 22 23 . 24 , 25

>25	/ >25	REPEAT	A˜B	M.SCAN
		? !	(	)
	OUTPUT
·		·	P	p
				MUSIC SYNC
	=	+	r
0/)	<	>	MD SYNC	T.REC
	0	)		<	CLEAR
	NAME	CHAR
	NAME IN
MENU/NO	MENU/NO	YES	CLEAR	>
				REC LEVEL	YES
				MENU SELECT

1While the deck is stopped, press MENU/NO twice to display SET UP menu.

2Turn AMS to display “PROGRAM”, then press AMS (or YES).

3Do either a) or b) to create a program:

a)When using the controls on the deck

1Turn AMS until the track number you want appears in the display.

2Press AMS.

If you enter the wrong track number

Press 0or )until the wrong track number flashes, turn AMS to set the correct track number, then press AMS.

b)When using the remote

Press the number buttons to enter the tracks you want to program in the order you want. To program a track with a number over 25, use the >25 button (see page 25).

If you enter the wrong track number

Press 0or )until the wrong track number flashes, then enter the correct track number with the number buttons.

4Repeat Step 3 to enter other tracks.

The entered track is added to the location where the “ ” (cursor) flashes.

Each time you enter a track, the total program time is added up and appears in the display.

5After finishing programming, press YES. “Complete ” appears and programming is completed.

6Set the Program Play mode.

a)When using the controls on the deck

1Press MENU/NO twice to display SET UP menu.

2Turn AMS to select “PLAY MODE”, then press AMS.

3Turn AMS to select “PROGRAM”, then press AMS.

“PGM” appears in the display.

b)When using the remote

Press PROGRAM so that “PGM” appears in the display.

7Press ·to start Program Play.

To cancel Program Play

While the deck is stopped, select “CONTINUE” instead of “PROGRAM” in Step 6 above (or press CONTINUE on the remote).

“PGM” disappears.

zThe program remains even after Program Play ends

When you press ·, you can play the same program again.

(Continued)

29EN