Sony MDS-W1 31EN, Playing Two MDs Continuously (Relay Play), To stop Relay Play, To cancel Relay Play

To play in

Normal play (page 13)

Shuffle Play (page 28)

Program Play (page 29)

· P p

·

Playing MDs

Playing Two MDs Continuously (Relay Play)

You can have the deck play two MDs in succession from deck A to deck B in any play mode.

	RELAY
§EJECT	§EJECT
￿AMS ±	￿AMS ±
0 ) r	0 ) r

· P p

1Insert MDs into both decks.

2Press RELAY.

The RELAY indicator turns on.

3Select the play mode you want according to the table below.

Select in SET UP menu ”PLAY MODE”

(or press on the remote)

CONTINUE

SHUFFLE

PROGRAM

When “REP” or “REP 1” appears in the display, select “OFF” in SET UP menu “REPEAT” or press REPEAT on the remote until “REP” or “REP 1” disappears (see pages 26 and 27).

4Press ·on deck A to start playing.

When playback on deck A finishes, playback on deck B (which is currently stopped) begins automatically.

To stop Relay Play

Press pon the deck which is playing.

To cancel Relay Play

Press RELAY to turn off the RELAY indicator.

Notes

•You cannot do Relay Play while deck B is playing, recording or editing.

•If you change the pitch during Relay Play, the pitch changes in the same manner for both deck A and deck B. The pitch setting returns to the initial value (0%) when you turn the deck off or eject the MDs from both deck A and deck B.

•While the RELAY indicator is on, the play mode changes in the same manner for both deck A and deck B.

•If you set either deck to “REPEAT ALL” during Relay Play, playback repeats continuously in the order of deck A ndeck B ndeck A ndeck B ndeck A ....

31EN