Sony MDS-W1 39EN, Labeling tracks and MDs with the remote Z, Copying a track or disc title within an MD (Name Copy), To cancel the Name Copy Function

Editing Recorded MDs

Copying a track or disc title within an MD (Name Copy)

You can copy a track or disc title to use it as a title of another track or the disc title within a disc. Note that you can do this operation by using the controls on the deck only.

See page 43 to copy a track or disc title between two MDs.

1Press MENU/NO to display EDIT menu.

2Turn AMS to select “Name”, then press AMS or YES.

3Turn AMS to select “Name Copy”, then press AMS or YES.

4Turn AMS to select “Disc” to copy the disc title, or the track whose title you want to copy and press AMS or YES.

If “ No Name!!” appears in the display

The disc or the track has no name.

5Turn AMS to select “Disc” for disc title or to specify the track number to copy a title, and press AMS or YES.

“Complete ” appears for a few seconds to indicate that the copying operation is completed.

If “Name Over Write??” appears in the display

The disc or track you selected already has a title. If you continue the title copying, press AMS or YES.

To cancel the Name Copy Function

Press MENU/NO or p.

Labeling tracks and MDs with the remote Z

EJECT

6

			DECK		RELAY		DECK
			A				B
DISPLAY			SCROLL		TIME		INPUT	TIMER
		PLAY MODE					DATE
CONTINUE			SHUFFLE	PROGRAM RECORDED PRESENT
A		B		C		D		E
F	1	G	2	H	3	I	4	J	5
K	6	L	7	M	8	N	9	O	10	Alphabet/number
P	11	Q	12	R	13	S	14	T	15
										buttons
U	16	V	17 W 18			X	19	Y	20

Z21 – 22 23 . 24 , 25

REPEAT A˜B M.SCAN

/>25 ? ! ( )

OUTPUT

0/)	·		P	p	p
	=	+	r	MUSIC SYNC
	<	>	MD SYNC T.REC

0)

NAME	NAME IN	<	CHAR
	NAME CHAR
	MENU/NO YES	CLEAR
		>	CLEAR
		MENU SELECT
		REC LEVEL

MENU/NO YES

1Press NAME.

A flashing cursor appears in the display, then do the following:

To label	Make sure that the deck is
A track	Playing, pausing, recording the
	track to be labeled, or stopped after
	locating the track to be labeled
An MD	Stopped with no track number
	appearing in the display

2Press CHAR repeatedly to select the character type as follows:

To select	Press CHAR repeatedly until
Uppercase letters	“	” appears in the display
Lowercase letters	“	” appears in the display
Numbers	“		” appears in the display

3Press an alphabet/number button to enter a character.

After you enter a character, the cursor shifts rightward and waits for the input of the next character.

You can change the character type at any time during Step 3 (see Step 2).

(Continued)

39EN