WALKMAN User Guide
Getting Started
How to Use the Software
Music
Videos/Photos
FM Radio
Timer
Settings
Troubleshooting
Important Information
Specifications
Contents list
Top page > Troubleshooting > Possible Causes of Symptoms > Other
Other
There is no beep sound when the player is operated.
[Beep Settings] is set to [Off].
Set [Beep Settings] to [On] [Details].
The beep does not sound when the player is connected to the cradle (not supplied), or another device.
The player gets warm.
The player may become warm when the battery is being charged and just after charging. The player also may get warm when a large amount of data is transferred. This behavior is normal and not cause for a concern. Set the player aside for a while to allow it to cool down.
The date and time have been reset.
If you left the player for a while with the battery used up, the date and time may be reset. This
is not a malfunction. Charge the battery until appears on the screen, and set the date and time again [Details].
Noise is generated when plugging or unplugging the headphones.
Take off the headphones when plugging or unplugging the headphones. If you plug or unplug the headphones while playing a song, you may hear noise from the headphones. This is not a malfunction.
The alarm does not function.
When setting the alarm, the setting was stopped halfway or the player was turned off without confirming the setting of the hour and minutes.
The alarm does not function while the player is connected to a computer. Disconnect the USB cable.
The remaining battery power is low or insufficient.
Charge the battery by connecting the player to a running computer [Details].
The alarm does not go off.
The alarm will not sound in the following situations.
Connected to a computer.
The alarm is delayed.
In the following situations, the alarm will be postponed until the process is finished. Deleting data.
145