RCD-W7V 4-236-407-11(1)
20
US
Connecting to make reccordings from external source
Connect a To the

Amprifier (Receiver) ANALOG IN (L/R) jacks or DIGITAL OPTICAL IN jack

zInput jacks
ANALOG: Connect the ANALOG IN (L/R) jacks to the TAPE rec/out on your receiver or processor.
OPTICAL: Connect the DIGITAL OPTICAL IN jack to the optical rec/out jack on your receiver or processor.
zTo make recordings from external digital sources
• If your receiver does not have digital output jacks, you may connect the DIGITAL OPTICAL IN jack on the
recorder directly to the optical rec/out jacks on your CD player or other digital devices.
• If the CD player has both types of outputs, you may connect one to the input of your receiver and the other
directly to the unit.
Notes on digital optical connections
• Use a commercially available optical fibre cable.
• To ensure proper connection of optical cable, fully insert it into the jack until there is an audible click.
• Remember to save the plastic dust caps that cover the optical jacks, and replace them when a jack is not in use to
prevent dust from entering the connection point.
Connecting the AC Power Cord

Connect the AC power cord to a wall outlet.

play/in
play/in rec/out
rec/out
TAPE
optical
Compact Disc Recorder
: Signal flow
To AUDIO IN (L/R)
To audio output (L/R)
To DIGITAL IN
To digital output
(optical)
Amplifier (Receiver)
*RCD-W7V.p65_13-22 12/9/01, 6:11 PM20