Sony RCD-W7V Recording a CD to CD-R or CD-RW disc at High Speed, 47US, Press CD Synchro High

Recording a CD to CD-R or CD-RW disc at High Speed

(High Speed Synchro-Recording)

You can easily make digital recordings from a CD to a CD-R, or CD-RW, faster than normal Synchro-Recording, making track numbers in the same sequence as the original CD.

Before recording, see “Notes” on page 48. After recording, you must finalize the disc. Until the disc is properly finalized, it cannot be played on any other machine. See “Finalizing CD-R and CD-RW discs” on page 51.

CD SYNCHRO HIGH

CD SYNCHRO

HIGH

1 Press POWER.

2 Press Aof DECK B and place a recordable CD-R or CD-RW on the disc tray. Press Aof DECK B again to close the disc tray.

With the label side up

“TOC” starts to flash. The recorder starts to read the TOC (Table of Contents) data and shows the type of the disc in the deck on the front panel display.

*RCD-W7V.p65_46-5347

3 Press Aof DECK A and place a CD on the disc tray. Press Aof DECK A again to close the disc tray.

4 Press CD SYNCHRO HIGH.

“CD SYNCHRO” appears and “REC” flashes in the front panel display. And the recorder (DECK B) optimizes itself for the best possible recording and “OPC” appears on the display shortly. DECK A will check that digital recording is available.

DECK B stands by for recording, and DECK A stands by for playing.

TRACK	MIN SEC
DECK A	CD SYNCHRO	REC
	HIGH
5 If front panel display is displayed
			Recording
as above, it will be ready to record.
Press Hon the front panel or on
the remote to start recording.
High-Speed recording starts. You
cannot monitor the recorded signal			on
during recording. DECK A and DECK
			CDR-
B will automatically stop after

recording.

1 track CD synchro (High speed)

During stop, press AMS (./>) until you find the track after you press CD SYNCHRO HIGH.

To stop recording

Press x.

Notes

• When copying a disc digitally recorded under control of the Serial Copy Management System (SCMS), the recorder automatically select the analog recording and the recording speed will become normal. For detailed explanation on SCMS, refer to the “Notes” on page 49.

• When copying a commercial music CD contains copy-prohibit signals, the recorder automatically select the analog recording, and the recording speed will become normal.

47US

12/9/01, 6:10 PM

RCD-W7V 4-236-407-11(1)