Finalizing a CD-R or CD- RW disc
Finalizing completes the recording of a disc. It enables you to play the disc on other players. (The player must be
When a recording is finished, a
When using the remote, set DECK A/B switch to DECK B for operations on DECK B.
FINALIZE
FINALIZE
1 Press FINALIZE.
The “FINALIZE” indicator will begin to flash, and the PLAY, PAUSE, and REC indicators light up for about 8 seconds. Erasing enters standby mode.
2 Press Hwhile the “FINALIZE” indicator is flashing.
Finalizing starts. During finalizing, “ TOC WRITE” appears in the display and the remaining time for finalizing appears in the display. When the finalizing process is finished, the total track number and the total playing time appear in the display and the TOC (red) indicator lights off.
Notes
•The TOC (red) indicator appears on the front panel display if the disc you put in DECK B has not been finalized. Check the indicator each time before finalizing.
•Once finalizing process starts, you cannot stop in the middle of the process.
•Do not turn off the recorder or disconnect the recorder from the AC power source in the middle of the finalizing process.
Recording on
51US
12/9/01, 6:10 PM