Checking the Remaining Recordable Time

When you placed an unfinalized CD-R or CD-RW in the DECK B, you can also check the remaining recordable time. The information appears as follows:

When using the remote, set DECK A/B switch to DECK B for operations on DECK B.

Each time you press TIME, front panel display is changed as below.

The total track number and total playing time are displayed

TRACK

MIN

SEC

The total track number and the remaining recordable time are displayed.

MIN SEC

On the TOC and CD-R/RW indicator

The CD-R/RW indicator shows which type of recordable disc is in DECK B, and whether the recordable disc has been already finalized.

TOC

The CD-R/RW indicator

When you put an unfinalized CD-R disc in the disc tray, the CD-R indicator lights up. When you put a CD-RW disc in the disc tray, the CD-RW indicator lights up, and it does not matter if the disc has not been finalized.

The TOC indicator

When you put an unfinalized CD-R/RW disc in the disc tray, the TOC indicator lights up in the front panel display.

Note

When you put a CD or finalized CD-R disc in a disc tray, the CD indicator lights up,

Adjusting the Recording Level (ANALOG IN only)

You can adjust the recording level using the REC LEVEL control on the front panel. Adjust the recording level so that the “OVER” indicator on the level is not normally appears.

The “OVER” indicator

L OVER R

If rec level is too loud, “OVER” appears in the front panel display.

50US

*RCD-W7V.p65_46-53

50

12/9/01, 6:10 PM

RCD-W7V 4-236-407-11(1)

Page 50
Image 50
Sony RCD-W7V operating instructions On the TOC and CD-R/RW indicator, Checking the Remaining Recordable Time, 50US