When using On-PC Setup

If you set up the Remote Commander using On-PC Setup, you do not need to read this PDF manual “Setting by On- Remote Setup”.

(pages 45 – 69)

Setting procedure for On-

Remote Setup

If you set the Remote Commander On- Remote Setup, follow the procedure below.

Step1: Setting the preset codes (page 45).

Step2: Operating AV components using the Remote Commander.

After finishing the setting of the preset codes, you can use the Remote Commander to operate your AV components.

•Operating the XPRESS function (page 22).

•Operating components individually (page 27).

Option1: You can also change the Unit Settings such as backlight and beep (pages 34, 41).

Option2: You can also change the settings of the buttons or keys on the Remote Commander.

•Using non-preset remote control operations (Learning function) (page 47).

•Programming a series of actions with just one button (System Control function)

(page 51).

•Setting the XPRESS macro activation (page 56).

•Controlling the volume of visual components connected to an audio component (page 57).

•Setting the Timer (page 59).

•Changing the names of labels (page 65).

When using On-Remote Setup

If you set up the Remote Commander using On-Remote Setup, you do not need to install the AX Remote Editor and its driver, or connect the Remote Commander to your PC. You also do not need to read the PDF pages 16 to 20.

Started Getting

15