Controlling the volume of visual |
| 4 Press the TV or RCVR key to | |
components connected to an audio |
| ||
component (continued) |
| select the volume control. | |
2 Press the Display title (SET) once. |
| TV: You will hear the sound of your | |
| visual components from your TV | ||
|
|
| |
SET |
|
| speakers. |
|
|
| RCVR: You will hear the sound of |
|
|
| your visual components from the |
“VOLUME” flashes on the Label keys. |
| loudspeakers connected to your | |
| amplifier. | ||
SU |
|
| The volume control setting changes |
LEARN |
|
| and a beep sounds each time you |
NG SET | /2 |
|
press the keys.
LABEL VOLUME LIGHT DISPLAY
3Press “VOLUME” on the Label keys.
VOLUMEThe setting display of volume control appears.
The current setting is shown inside the [ ], while the other flashes.
SU
LEARN
NG VOLUME
VISUAL [ | TV | ] | RCVR |
5Press and hold the COMMANDER OFF button for more than 2 seconds.
COMMANDER
OFF
The Remote Commander turns off.
If you want to quit before finishing
Press and hold the COMMANDER OFF button for more than 2 seconds. The previous status returns, and the Remote Commander turns off.
If you want to return to the previous display
Press the BACK button or the COMMANDER OFF button.
Notes
•If you have already programmed any signal for the VOLUME or MUTING button of each component by “learning,” the procedure above will not change the function of the VOLUME and MUTING buttons.
•If you have programmed volume control signals on the VOLUME or MUTING buttons of a TV or RCVR, you can only use that signal when you select TV or RCVR. For other components, the preset volume control signals for TV or RCVR (depending on the above setting procedure) will be transmitted. To use the new signals, you need to program each button for each component by the learning procedure (page 47).
58