Setting the beep
The Remote Commander is preset at the factory with the confirmation beep set to on. To change this setting, perform the following procedure.
1While pressing the COMMANDER OFF button, press the MUTING button.
COMMANDER
OFF
MUTING
“SET” appears as the Display title.
SU
LEARN
NG SET
LIGHT DISPLAY OTHER
If “OTHER” does not flash on the Label keys, press the Display title (SET) repeatedly until it appears.
2Press “OTHER” on the Label keys.
OTHER“OTHER” appears as the Display title.
SU
LEARN
NG OTHER
BEEP DS_TIME CLOCK RESET
3Press “BEEP” on the Label keys.
BEEPThe setting display for beep appears. The current setting is shown inside the [ ], while the other flashes.
SU
LEARN
NG OTHER
BEEP | [ ON ] OFF |
4Press the ON or OFF key to select the beep.
ON: Turns on the beep.
OFF: Turns off the beep.
The beep setting changes and a beep sounds each time you press the key.
5 Press and hold the |
|
| |
COMMANDER OFF button for | Unit |
more than 2 seconds. | |
COMMANDER | Settings |
OFF |
|
The Remote Commander turns off.
If you want to quit before finishing
Press and hold the COMMANDER OFF button for more than 2 seconds. The previous status returns, and the Remote Commander turns off.
If you want to return to the previous display
Press the BACK button or the COMMANDER OFF button.
41