TAPE (Cassette deck)
KEY DISPLAY
POWER
1 – 9, 0
ENTER
A/B
m
N
M
REC*
x
X
DISPLAY
.
FUNCTION
To turn the power on/off
To select the track number
To enter the setting
To select a tape deck: Deck A or B (Dual cassette deck only
To rewind
To play
To
To record
To stop
To pause
To show the current play status on the display
To search the beginning of a track in the rewind direction
KEY DISPLAY
REC_MUTE
–REC_LEVEL
REC_LEVEL +
C.RESET
DOLBY_NR
PROGRAM
C.MEMORY
FUNCTION
Record muting
To make the recording level lower
To make the recording level higher
To reset the tape counter
To toggle the Dolby Noise Reduction
To go into the program mode by first pressing, and start program play by second pressing
To switch the position memory operation according to the tape counter to on/off
n
>
VOLUME +
VOLUME –
MUTING
REC_REV
REC_FWD
FADER
To reverse
To search the beginning of a track in the
Volume up (RCVR)
Volume down (RCVR)
To mute the volume. Press again to turn muting off.
To record in the reverse direction
To record in the forward direction
To stop after fading out and fade in after starting
*To avoid accidental recording, the REC key does not work unless pressed for more than 2 seconds (factory setting).
Appendix
Continued 89