Setting the LCD display (continued)
Setting the contrast of the
LCD display
You can adjust the contrast of the LCD display if the screen is not viewed properly. To change this setting, perform the following procedure.
1While pressing the COMMANDER OFF button, press the OK button.
COMMANDER
OFF
OK
The setting display for contrast appears.
SU |
|
|
|
|
|
|
| LEARN | CONTRAST | POWER | |
|
| NG |
| ||
1 | 2 | 3 |
| A/B |
|
|
|
| |||
4 | 5 | 6 | TOP MENU |
| |
| REC |
| |||
7 | 8 | 9 | DISPLAY MAIN/SUB |
| |
|
|
| |||
+10 | 0 | ENTER |
| INPUT | LIST |
|
|
|
2Press the CHANNEL +/– button to adjust the contrast of the LCD
display.
CHANNEL
You can set the contrast level from 1 to 15.
CHANNEL +: Darker contrast
CHANNEL
Note
If you press the CHANNEL +/– button and the contrast level is already at the minimum/maximum level, the beep does not sound. The level can be set from 1 to 15.
3Press and hold the COMMANDER OFF button for more than 2 seconds.
COMMANDER
OFF
The Remote Commander turns off.
If you want to quit before finishing
Press and hold the COMMANDER OFF button for more than 2 seconds. The previous status returns, and the Remote Commander turns off.
40