Setting the backlight (continued)

10Press the ON or OFF key to select the fade effect of the backlight.

ON: fade in/out backlight

OFF: normal backlight

The fade effect of the backlight changes and a beep sounds each time you press the keys.

11Press the BACK button or the COMMANDER OFF button.

COMMANDER

BACKOFF

or

“LIGHT” appears as the Display title.

SU

LEARN

NG LIGHT

OFF_TIME LEVEL FADE ON_MODE

12Press “ON_MODE” on the Label keys.

ON_MODE

The setting display for buttons to activate the backlight appears. The current setting is shown inside the [ ], while the other flashes.

SU

LEARN

NG LIGHT

ON_MODE

LIGHT [ ALL ]

13Press the LIGHT or ALL key to select which buttons activate the backlight.

LIGHT: The backlight is activated by pressing the LIGHT button only. ALL: The backlight is activated by pressing any button on the Remote Commander except the VOLUME +/–, CHANNEL +/– and COMMANDER OFF buttons.

The buttons to activate backlight changes and a beep sounds each time you press the keys.

Note

In the “ALL” position, if you use the Remote Commander frequently, the battery life may be shorter. In this case, shorten the automatic-off time.

14Press the BACK button or the COMMANDER OFF button.

COMMANDER

BACKOFF

or

“LIGHT” appears as the Display title.

SU

LEARN

NG LIGHT

OFF_TIME LEVEL FADE ON_MODE

15Press and hold the COMMANDER OFF button for more than 2 seconds.

COMMANDER

OFF

The Remote Commander turns off.

36