5Select the component name you want the Remote Commander to program the series of actions (a macro) by pressing the Label key (in this case, TV).
TV
The “TV” appears as the Display title, and the programmable keys for the selected component flash.
SU
LEARN | TV | /1 POWER |
NG |
When the maximum of 32 steps are input, the System Control macro programming finishes and a beep sounds, and the System Control macro displays in order. “SYSTEM” appears as the Display title.
SU
LEARN
NG SYSTEM
SYSTEM5 SYSTEM6 SYSTEM7 SYSTEM8
1 2 3
4 5 6
2PIC SWAP
Notes
• You can input up to 32 steps for one |
System Control function. |
7 8 9
DISPLAY MAIN/SUB
• If you need a manual delay between two |
0 | INPUT | WIDE |
ENTER |
|
TV_TUNER ANT/SW
6Press the key(s) or button(s) for the desired operation.
If you want to turn on the TV, press the POWER key.
POWER
If you want to add commands from a different component, press the COMPONENT button and then select the component name from the Label keys.
When you have programmed the buttons on the Remote Commander
The names of buttons not on the LCD display (VOLUME
Gand OK ) appear on the right Label keys.
steps, press the TIMER button to add an |
interval of 250 ms. (ms: 1/1000 second) |
• The Display title and the LIGHT button |
are not counted as steps. |
7When you have programmed all the keys and buttons, press the COMMANDER OFF button.
COMMANDER
OFF
A beep sounds, the System Control macro programming finishes and displays in order.
8Press and hold the COMMANDER OFF button for more than 2 seconds.
COMMANDER
OFF
The Remote Commander turns off.
by Setting
Setup
Continued 53