Calibrating the alignment
of the LCD display
You can calibrate the alignment of the LCD display if the
1While pressing the COMMANDER OFF button, press the MENU button and EXIT button.
COMMANDER |
|
|
OFF | MENU | EXIT |
The setting display for calibrating the alignment of the LCD display appears.
SU
LEARN
NG ALIGNMENT
2Press the point on the
The other point appears on the top- right of the LCD display.
SU
LEARN
NG ALIGNMENT
3Press the point on the
The square appears in the center of the LCD display.
SU
LEARN
NG ALIGNMENT
4Press the square in the center of the LCD display.
When the calibration is complete, the beep sounds, and the LCD display returns to the selecting display of display setting.
SU
LEARN
NG DISPLAY
Note
When calibrating, be sure to press the point accurately, otherwise the calibration will be off and you will need to start over.
5Press and hold the COMMANDER OFF button for more than 2 seconds.
COMMANDER
OFF
The Remote Commander turns off.
If you want to quit before finishing
Press and hold the COMMANDER OFF button for more than 2 seconds. The Remote Commander turns off.
Settings Unit
Continued 39