Setting the XPRESS macro activation
You can switch the XPRESS macro activation to on or off when selecting the XPRESS function.
If you set to off, the XPRESS display appears without sending the XPRESS macro.
To change this setting, perform the following procedure.
1While pressing the COMMANDER OFF button, press the MUTING button.
COMMANDER
OFF
MUTING
“SET” appears as the Display title.
SU
LEARN | SET | /1 |
NG |
PRESET LEARN MACRO TIMER
2Press “MACRO” on the Label keys.
MACRO
3Press “XPRESS” on the Label keys.
XPRESSThe setting display for XPRESS macro activation appears.
The current setting is shown inside the [ ], while the other flashes.
SU
LEARN
NG MACRO
XPRESS Macro | ON [ OFF ] |
4Press the ON or OFF key to select the XPRESS macro activation.
ON: Turns on the XPRESS macro activation.
OFF: Turns off the XPRESS macro activation.
The setting of the XPRESS macro activation changes each time you press the key.
5Press and hold the COMMANDER OFF button for more than 2 seconds.
COMMANDER
OFF
“MACRO” appears as the Display title.
SU
LEARN
NG MACRO
SYSTEM XPRESS
The Remote Commander turns off.
If you want to quit before finishing
Press and hold the COMMANDER OFF button for more than 2 seconds. The previous status returns, and the Remote Commander turns off.
If you want to return to the previous display
Press the BACK button or the COMMANDER
56 | OFF button, the previous LCD display returns. |
|