12Press the ON/OFF or TEST key to activate the Timer.
ON/OFF: With a beep sound, “ON” appears on the
SU
LEARN
AM NG PROG4
ON
ON/OFF MACRO TIME TEST
To reset the timer standby mode, press the ON/OFF key again.
SU
LEARN
AM NG PROG4
OFF
ON/OFF MACRO TIME TEST
13Press and hold the COMMANDER OFF button for more than 2 seconds.
COMMANDER
OFF
The Remote Commander turns off.
If you want to quit before finishing
Press and hold the COMMANDER OFF button for more than 2 seconds. The previous status returns, and the Remote Commander turns off.
If you want to return to the previous display
Press the BACK button or the COMMANDER OFF button.
Notes
• Some Timer may not be executed at the set time because of conflicts with other set Timer. If the execution time arrives while another Timer is running, the later Timer begins only after the first one ends.
In this case also, the program may not be executed at the set time. So, set the Timer regarding the contents and the duration of the Timer execution.
• When using the Timer on this Remote Commander, only one setting can be assigned to one program. If you want to set the Timer to turn on at a programmed time, and to set the Timer to turn off at another time, program the two settings separately.
• If there are some programs set to be executed at the same time, they start in order from the lowest Timer number.
• According to the status of the component operated by the Timer, the next program might not function successfully. When setting a Timer, check carefully the setting of other
programs. Settingby
Setup
Continued 63