Unit Settings

Setting the backlight

The LCD display’s backlight is preset at the factory to activate whenever the Remote Commander is operated, and to switch off automatically if you do not operate for more than 10 seconds. You can set the backlight automatic-off time, brightness, fade effect and which buttons activate the backlight. To change this setting, perform the following procedure.

1While pressing the COMMANDER OFF button, press the MUTING button.

COMMANDER

OFF

MUTING

“SET” appears as the Display title.

SU

LEARN

NG SET

LIGHT DISPLAY OTHER

If “LIGHT” does not flash on the Label keys, press the Display title (SET) repeatedly until it appears.

2Press “LIGHT” on the Label keys.

LIGHT

“LIGHT” appears as the Display title.

SU

LEARN

NG LIGHT

OFF_TIME LEVEL FADE ON_MODE

3Press “OFF_TIME” on the Label keys.

OFF_TIME

The setting display for automatic-off time of the backlight appears.

SU

LEARN

NG LIGHT

OFF_TIME (-) 10sec (+)

4Press the (–) or (+) key to change the automatic-off time of the backlight.

You can set the automatic-off time from 1 to 60 seconds. Each time the (–)/(+) key is pressed, the time decreases/increases by 1 second. For example, “20sec” on the Label keys means 20 seconds.

34